Services

A flood within a property can feel overwhelming. Challenges such as extraction of water, risks of contamination, water damage and secondary issues such as mould growth, can seem a daunting prospect. Curve Management Services can effectively deal with all elements of flood damage reducing stress for you.

We will return your property to pre-incident condition and, by instructing us, you deal with only one point of contact. We will manage the work from start to finish reducing stress, disruption, time and costs.

Curve Management Service’s experienced team have been dealing with water and flood damage in domestic and commercial properties for over ten years. During this time we have dealt with all forms of flooding from burst pipes to major environmental flooding events.

Our trained team are on hand to deploy state of the art technology to effectively clean and dry properties. With a commitment to customer satisfaction, we aim to return properties to a pre-incident condition in no time.

Defects and damage to flat roofs can allow large volumes of rainwater to penetrate a roof membrane and migrate through the roof to the insulation layer. Once in the insulation layer, the water can cause secondary damage such as mould growth, corrosion and structural deterioration.

Water trapped in the roof structure is difficult to remove by normal methods. One option would be to simply replace the entire roof. However, this option is extremely expensive and time-consuming.

Furthermore, replacing a roof can delay other works on a building under construction.

At Curve Management Services we offer a professional de-watering a drying service. Using our experience and state of the art technology we can efficiently remove standing water from within a roof structure. Our service also allows us to inject dry air into the roof to further dry the structure.

The service typically takes weeks to complete compared with months if you were to replace the roof. The service is discreet, will allow other trades to continue to work and the progress can be monitored in real-time.

A major risk to the health of occupants following any water or damp issue in a property is mould growth. Damp in a domestic or commercial property can provide mould with the ideal conditions in which to thrive.

The risk to human health is proportional to the exposure time, the mould species and density of airborne spores. Curve Management Service’s can assist and, following in inspection of the affected areas, we will supply a proposal to remediate the mould.

Following a flood or an escape of water, it is vital the drying process commences swiftly to avoid secondary damage. When you are looking to return to normal as quickly as possible, our pressure drying service can help.

Pressure drying can be started once standing water has been removed, a fast solution to drying in the correct circumstances, i.e. when there are no concerns about the control of fibres, spores and dust entering the room.

By forcing dry air into the building’s structure, pressure drying is a fast and effective method for drying a structure. By increasing the temperature of the air, the vapour pressure in the damp material is also raised, helping it to dry faster. Damp air is released into the room and dehumidified before being removed.

Pressure drying is fully flexible allowing air to be introduced into difficult to reach areas. By including the option of remote monitoring we can control the drying process reducing the regularity of visits to the site.

Removal of excess moisture from insulation in floor joists or a framed construction is important to ensure the risk of secondary damage is eliminated?

Employing a combination of air movement and dehumidification we are able to introduce large quantities of dry air into the affected areas. Our equipment will discretely remove moisture and will have you back up and running as normal in minimal time.

Our system allows for large volumes of dry air to be forced into even the hardest to reach places. The systems can be controlled by a hydrostat to ensure optimum drying conditions are maintained.

Remote monitoring allows us to adjust and report on the progress at all times.

If you have experienced localised water damage our focussed drying service is an ideal solution.

We can efficiently dry a localised area by isolating. This allows the full capacity of the drying equipment to be concentrated enabling faster drying times.

Dry air from the dehumidifier is blown into the isolated area creating a very dry climate. By introducing heat into the enclosure we are able to speed the drying process further.

Newly constructed buildings often suffer from excessive moisture retention and even physical water damage. On-site wet trades combined with various moisture-retaining materials in use require careful control of atmospheric conditions within the building.

Furthermore rain, snow and frost will increase moisture levels in structures which are not yet weatherproof.

By understanding the structure and working with you we can help remove excess moisture and eliminate further damage.

A fire in your home or business can be one of the most traumatic events you will ever experience. At Curve Management Services we have the expertise to help you overcome the event swiftly and as stress-free as possible.

Our trained technicians will ensure the property is restored to its pre-incident condition. We recognise communication is important and our Claim Manager will ensure you are kept up-to-date with the progress of the job.

Electronic integrity testing provides a non-invasive method of detecting the smallest of leaks in the membrane of a flat or low-pitched roof. Innovative roof leak detection equipment make it possible to locate leaks on roofs precisely and faster than conventional methods. Electronic integrity testing is an important service offered by Curve Management Services. Defects within the waterproofing membrane are identified with pinpoint accuracy, resulting in targeted and efficient repairs to the entire roof. Electronic integrity testing provides the ability to locate roof leaks quicker and more accurately than ever.

Electronic integrity checks are also frequently used to give customers the assurance that the installed roof is fit for purpose and has a reliable service life. Electronic integrity tests are ideal for use on flat roofs or low-pitched roofs. Our Electronic Integrity Test Service provides a non-invasive means of detecting leaks in the roofs' membrane. Utilizing innovative roof leak detection equipment, flat roof leaks can now be located with pinpoint accuracy and quicker than traditional methods.

Electronic integrity testing is also frequently used to give the customer the assurance that the roof installed is fit for purpose and has a reliable service life. Electronic integrity testing is ideal for use on flat or low-pitched roofs, and because all roofing membranes are more or less non-conductive, the electrical impulse from the wire ring circuit selects a path over the roof via the moisture to the point where the leak is located.

This testing method eliminates the hazards and potential damage that can be caused by conventional flood testing, and can even identify leaks that are invisible to the naked eye.